SOLLAST 40W REMOTELY OPERATED ROTATING LIGHT
SOLLAST 40W REMOTELY OPERATED ROTATING LIGHT
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
SOLLAST 40W REMOTELY OPERATED ROTATING LIGHT
SOLLAST 40W Remotely Operated Rotating Light
Remotely operated rotating light for marine, automotive, heavy equipment, farming, search and rescue applications. 4,800 lumens, billet 6061 housing, IP67 sealed, vibration tested — with joystick controller and plug-and-play harness in the box.
Designed, built and tested in Queensland, Australia. The SOLLAST 40W delivers in-cab pan/tilt control, infinite rotation and 90° tilt, so you can direct light exactly where it’s needed without leaving the driver’s seat.
Light Specifications
| Beam Type | Spot |
| Operating Voltage | 10–30V compatible |
| Chip | 4 × 10W LED |
| Lumen | 4,800 lm |
| 1 Lux Distance | 271 m (890ft) |
| Colour Temperature | 6000–6500K |
| Max Power Draw | 40W (3A @ 13.5V) |
| LED | OSRAM P9 |
| Housing | Cast aluminium |
| Lens | UV-stable polycarbonate |
| Certifications | IP67, RoHS compliant |
| Vibration & Shock | Resistant |
| Temperature Protection | Automatic |
Rotating Assembly
| Max Power | 10W (0.7A @ 13.5V) |
| Certifications | IP67 rating |
| Vibration & Shock | Resistant |
| Housing | Billet 6061 aluminium |
| Arms, Base Plate & Brackets | 5052 aluminium |
| Base | UV-stable thermal plastic |
| Tilt Range | 90° |
| Pan Range | Infinite (360° continuous) |
| Hardware | Black stainless steel |
| Operating Voltage | 10–30V compatible |
| Resting Power Draw | 0.05W |
| Circuit Protection | Reverse polarity & voltage transient |
What’s in the Box
Joystick Controller
Slim line joystick pan/tilt control with dedicated system and light buttons.
| Operating Voltage | 10–30V compatible |
| Certifications | IP67 rating |
| Joystick Sensor | Hall effect |
| Circuit Protection | Reverse polarity, overcurrent & voltage transient |
| Faceplate | 5052 aluminium |
| Housing | UV-stable thermoplastic |
| Mounts | 5052 aluminium |
| Buttons & Hardware | Black stainless steel |
Modes
Gives you 360 continuous rotation and 90 degrees of tilt. If you have multiple lights connected, briefly push the joystick down to cycle through each light individually before controlling them all again. To change modes, hold the system button for 2 seconds. The red LED lights will flash twice to indicate the mode has been changed.
Gives you proportional control around the preset position. All lights connected to the controller will complete a short homing sequence before returning to their adjustable preset positions. Once homing is complete, moving the joystick will proportionally move all connected lights before returning to centre when the joystick is released. To adjust the preset position of each light, briefly press the joystick down to select and slowly move each individual light into the desired position.
Invert Controls: Hold the system button and joystick down for 10 seconds to invert the pan and tilt controls for inverted mounting applications. Repeat the same steps to revert back.
Disable Auto Sleep: Hold the light button and joystick down for 10 seconds to disable auto sleep mode. In this mode the pan and tilt motors will continue to firmly hold the light’s position even when there is no joystick input. Repeat the same steps to revert back.
Mounting & Field Use
Collapsible row
Collapsible row
